UV Studio+by KO4CGQ, from F4HWN Live Viewer

Disconnected

UV Viewer

UV Tools

UV Studio+

Ready to connect

🔒 LOCK

# FUNCTION KEY

⇧ LONG PRESS

Connect the radio to see the RF Log here.
RF Log must be supported and enabled in the firmware.

RF Log

Direction	Frequency	Channel	Duration	Signal / Power	Voltage
--

ACTIVITY0--

AIRTIME00:00--

FREQUENCIES0--

Battery--

Sessions

Top frequenciesAirtime

How this page works

Firmware File (.bin)

No file selected Choose file

Download CHIRP driver

Read the 1024 memory channels from your radio, edit them, then write the changes back. Import and export use the CHIRP CSV format.

How this page works

Import and export

About this section

Importing changes only this page. Press Write changes to radio to send the channels to the radio.

Memory channels

About this section

Select all shown	#	Name	Frequency (MHz)	Duplex	Offset (MHz)	Mode	TX tone	RX tone	Power	Step (kHz)	Scan list	Skip	TX lock	Busy lock	Reverse	Compander	PTT ID	Delete channel

VFOs

About this section

The frequency each band's VFO A and VFO B starts on. A VFO frequency must stay inside its band.

VFO	Frequency (MHz)	Duplex	Offset (MHz)	Mode	TX tone	RX tone	Power	Step (kHz)	TX lock	Busy lock	Reverse	PTT ID

How this page works

Store several compatible F4HWN firmwares on the radio and pick one at boot (hold MENU). Writing only touches the external flash, so the radio stays usable.

#	Edition	Version	Size	Status	Actions

Firmware file (.bin)

No file selected Choose file

Target slot Display name

APP MANAGER

Install only the tools you need. Apps are launched from the radio's F + 7 menu.

How this page works

Waiting for radio…Connect the radio to check compatibility

0 apps installed0 of 48 slots used

#	Name	Version	Size	Status	Actions

Reading the community apps…

Install a local app.app

App file (.app)

No file selected Choose file

Target slot

Propose an app to the community

Share an app you made: UV Studio checks it here, then opens GitHub with the submission ready to send. You need a GitHub account.

App file (.app)

No file selected Choose file

Screenshot

Author

About UV Studio+

F4HWN's UV Studio, plus CHIRP-style memory channels and radio settings.

Version: v—
Author: KO4CGQ
Based on: UV Studio by F4HWN
Operation: Local, directly in the browser
Compatibility: UV-K5 V3 and UV-K1 with PY32F071 MCU

UV Studio+ is an independent fork of UV Studio, maintained by KO4CGQ for the W8LBZ club. It adds Memories (channels, VFOs, CHIRP CSV import and export, backups) and Radio settings for F4HWN firmware, and keeps up with every UV Studio release. Many thanks to Armel F4HWN for the firmware and for UV Studio itself.

F4HWN doesn't support this fork. Please report UV Studio+ problems on its GitHub page, not to F4HWN. UV Studio+ is open-source software licensed under the Apache License 2.0.

Disconnected

On your radio

Console

About UV Studio+